Baby Lock Model BLCS Bedienerhandbuch PDF herunterladen (Seite 10)

1. Remove machine from box

After removing the packing materials from

the box, gently lift your Baby Lock by grasp-

ing the handle provided on the top of the

machine. Place the machine on a sewing

table or any level surface that provides

ample work area to the left. Place the foot

controller in a pedal stay, if desired, and

place it under the sewing table.

2. Plug in the machine

Plug the power cord into the machine first,

then into a wall outlet. The power switch is

located toward the back on the right side of

the machine. Always make sure the power is

off when the machine is not in use (fig. A).

Available foot controller for U.S.A.: Model

YC-482 or YC-420W.

3. Polarized plug

This appliance has a polarized plug (one

blade wider than the other). To reduce the

risk of electric shock, this plug is intended to

fit in a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qual-

ified electrician to install the proper outlet.

Do not modify the plug in any way.

4. Foot controller

The sewing speed of the machine is deter-

mined by the amount of pressure applied to

the foot controller. When not in use, do not

place anything on the foot controller, or the

machine could start inadvertently and the

controller or motor could burn out.

Setting Up Your Baby Lock

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Keine Kommentare

Baby Lock Model BLCS Bedienerhandbuch Seite 10